home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr11
/
tri0693.zip
/
2
< prev
next >
Wrap
Text File
|
1993-06-01
|
29KB
|
735 lines
Ok guys, (and Lady`s) Here`s what ya need to do First.
If you don't have a copy of FD202, call your favorite BBS and D/L it.
The items that I`m about to mention may not be the best, or the worst
to use, and I don't want to get into discussions on "This is better than
that" kinds of stuff. These items do the best jobs for me, so I use them.
Here`s a checklist of some of the other things you'll need.
1. A Fossil Driver.
I use X00, but BNU will work also. Keep in mind that either one, may
not work on your system. I have a friend who can't use X00, but BNU
works fine on his system. Personally, I can use both, I just prefer
X00.
2. A Mail Tosser/Scanner
I really like GEcho. It's small, fast, and the price is right. (FREE),
if you can't afford to pay for it. (according to the GEcho docs).
3. TriDog (compatible with whatever ver. of TriBBS you run).
Tridog is a Fido/TriBBS message converter.
4. A Nodelist
A Nodelist is basically Front Doors dialing directory. It's how Frodo
knows who to call when your sending messages, mail, and files.
I`m in multi-nets, and can dial over 30,000 systems. It can also be
used to dial any system in the Nodelist thru FD`s terminal program.
(I gave up Telix, Qmodem, Commo etc. as FD`s term program does a better
job, IMHO).
There are several *different Nodelists. Fido has one, as well as World-
net, RelayNet, TTN etc. The TTN Nodelist is NOT the one that Mr. Munson
posts in another echo. That one is more of a text file for SysOp use,
and *not* for use with a Front End mailer.
The TTN *FIDO* Style Nodelist is available from my BBS, but when we get
ready to install it, I`ll post it here, as a Text file, and then tell
you what to name it, and how to compile it into FD. If ya get in a hurry
to get it, call my BBS (407) 292-3963 and download it. It's in the
Front Door Help file area, and it's name is TRI_ZONE.LST
5. Your Modems Init String
IMHO, this is the *MOST IMPORTANT THING* in the whole setup. If your
init is not right, Front Door will not work.
Now, if you still want to set it up, here`s what you need to do next.
You need to make a FD directory on your hard drive. I set up on drive C:
but you can use any other drive that's available on your system. Here`s my
directory setup;
C:\FD
C:\FD\MSGBASE
C:\FD\NETMAIL
C:\FD\NETFILE
C:\FD\NODELIST
C:\FD\PACKETS
Here is a brief description of the directories.
C:\FD - Front Doors Main Directory. This is where you unzip the FD202 files
to.
C:\FD\MSGBASE - Here is where you'll make several sub-directories for *each*
echo (message) area that you have. These sub-directories are
where GEcho will toss and scan your mail. More on this later
C:\FD\NETMAIL - This directory is where all your private messages, (messages
addressed to your node number) will be tossed.
C:\FD\NETFILE - This directory is where files that have been FREQ`d to you go.
It is also where all your incoming mail packets are stored
before they get tossed, (un-packed), and then they get
deleted, after your mail gets tossed.
C:\FD\NODELIST - Your Nodelist(s) go in here. As well as some other files
to be described later.
C:\FD\PACKETS - This is where your Out-Going packets are stored, and they
are deleted from this directory after they are sent.
After you make your directories, unzip FD202 to your MAIN (C:\FD) Front Door
directory. Go to that directory, and type in FDSETUP. (You may have to press
your spacebar to get the menu to come up the first time).
Ok. If you've unzipped your FD202 files to your main FD directory, and
typed in FDSETUP, and pressed your spacebar to create your SETUP.FD file,
you should see a menu in front of you. At the top of the screen, you should
see these headers;
File Global Mailer Editor Terminal Modem Printer Manager
The File header should be hi-lighted. If you press enter, you'll see;
Shell to DOS
Exit
Don't mess with these right now.
Use your right arrow key, and scroll over to Global, and press enter.
You will come to addresses. Press enter again, and addresses come up again.
This is where you put your MAIN Address. If you don't have the a nodelist
yet for TTN, leave me a message, and I`ll assign you an un-official TTN
address. If you've been in TTN for 6 months or more, you do have a TTN-
Fido style address, even if you don't know it yet.
Next, press your escape key.
Now press your down arrow key to go to the Site-Info box, and press enter.
There are 5 entry`s in this level. They are;
Name (Your BBS name goes here)
Location (Where yer at ie; Orlando, Fla for me)
Phone (Your phone number in the XXX XXX XXXX format)
Speed (Top speed of your modem 2400 or 9600) *
Flags (Fido stuff. If you wish to accept mail at any time, your
First flag will be CM (for Crash Mail), and your second
flag will be XA (For your mailer type). Separate your
flags with a comma as in CM,XA **
* Even if you have a 14.4 or higher, use 9600, as FD`s
internal programming will recognize the 14.4.
** There are other flags, one is MO (for mail only), and
there is a flag for you USR HST people also, H16 etc.
Next, press ESC, then your downarrow key to go to the Domains Box.
Press enter.
Your main address should be on the left with a second box on the right of
your screen. Inside this box, you'll see Zone and Domain.
If TTN is gonna be your first net, enter 40 in the Zone feild, and enter
TTN in the Domain feild.
press ESC
There's one box left marked AKA Matching, but we won't worry about this right
now, as we'll just setup your mailer for TTN at this time.
Use your down-arrow key again to go to the Filenames box, and press enter.
11 entrys here.
System C:\FD (your main FD directory)
Netmail C:\FD\NETMAIL (Where yer netmail goes)
Files C:\FD\NETFILE (Temp. storage of mail packets and files)
Packets C:\FD\PACKETS (Temp. storage of out-bound mail packets)
Log File C:\FD\FD.LOG (File that tells ya what FD`s been up to)
Banner C:\FD\WELCOME.BBS (ASCII text file) *
Nodelist C:\FD\NODELIST (Where yer nodelist goes)
In-Event C:\FD\INEVENT.BBS (ASCII text file) **
MSG Base C:\FD\MSGBASE (Where all your echo messages are stored)
Swapping C:\FD (Where FD should swap to)
* WELCOME.BBS is just an ASCII text file that you make with your favorite
text editor. It should say something like;
Please wait while the BBS gets fired up.
** INEVENT.BBS is another text file you make, and it should say something
like; Sorry, we're processing mail right now. Please call back later.
Press ESC, and Down Arrow again. This will put you in the General Box. Press
enter. 7 entrys here.
Your Country Code 1 (For USA)
Screen Flickers NO (Set to yes if you have a CGA monitor)
Use Fastkey Yes (If you have a 386 or better)
Screen Blanking Yes (Blanks your screen when FD ain't busy)
Blackout Timer 30 (seconds it waits before blanking screen)
Extended Keyboard Yes (If you have an extended keyboard,101 keys)
Force 24 Hour Format No
Press ESC, Down arrow, Enter for the Users Box. 2 entrys here.
Username (Your Name)
Access (Make yourself a Supervisor)
Press ESC 3 times. More in the next post.. Play around with some of the other
menus. Let's see how many of them ya get right <grin>.
Have a good`un.
Semaphore (Commercial ver. only)
We'll setup the Mailer section of FDSETUP in this message. Go to your Main
FD directory, and type FDSETUP . Scroll over to the Mailer section, and press
enter. The first item in this menu is Miscellaneous. Hi-light this, and press
enter.
20 entrys in this area.
Mail From Un-listed Systems (Yes)
Mail From Un-Protected Systems (Yes)
Mail From Un-listed Points (Yes)
Kill Empty Received Messages (Yes)
Terminal Only (No Mail) (No)
Mail Only (No BBS) (No)
Match Remote`s Zone (Yes)
Present All AKA`s To Remote System (Yes)
Trigger Exit Upon Receipt Of Netmail (No)
Upon Receipt Of Any File (No)
Print Received Messages (No)
Busy Retrys (20)
Retry Delay (30)
Delay Before First Call (Yes)
Days To Keep Mail History ( 7)
BBS Software Name (your BBS name, or close to it)
Seconds Before Passing to BBS (11)
Minimum Undialable Cost ( 1)
Honor Return Receipt Requests (RRQ) (No)
Press ESC, Down Arrow to LOG, press enter.
14 entrys.
Fatal Errors (Yes)
Other Errors (Yes)
Accounting Info (Yes)
Sent/Received Files (Yes)
Brief Messages (Yes)
Trivial Messages (Yes)
Transaction Info (Yes)
Transfer Messages (Yes)
Unexpected Passwords (Yes)
Session Information (Yes)
Remote Systems AKA`s (Yes)
Remote Systems Info (Yes)
Modem Responses (Yes)
DEBUG All of the Above (Yes)
Press ESC, Down Arrow to File Requests, press enter.
14 entrys, some left blank
Mode Anyone can Request
List C:\FD\FILES.LST (ASCII text file) *
SecList
Alias
SecAlais
Message C:\(wherever your BBS Master File List is)
Max Match 0
Max Time 0
Max Size 0
Min Speed 2400
Limited No
Start 00:00
End 00:00
Days ------A
* FILES.LST is a text file that lists ALL directories that you will allow
other people who run Front Ends to Freq from. ie;
C:\TRIBBS\NEWFILES
C:\TRIBBS\GAMES
C:\TRIBBS\TEXTFILES
You can add as many directories to this list as you wish to. Do this after we
finish the setup.
Press ESC, Down Arrow, Enter at Errorlevels. 13 entrys here.
300 200
1200 200
1275 200
2400 200
4800 200
7200 200
9600 200
12000 200
14400 200
19200 200
38400 200
Received Mail 31
Create Bat. file Yes
Press ESC, Down Arrow, Enter on Audio Control
11 entrys.
Clock No
UnPacked Any Mail Yes
UnPacked High Priority Mail Yes
Waiting Mail Yes
Inbound Connection Yes
Outbound Connection Yes
Completed Mail Transfer Yes
BBS Caller Yes
Fatal Error Yes
Audio Start Time 00:00
Audio End Time 00:00
We are done in this area. Press ESC several times to exit.
Go to FDSETUP (you should be able to do this by now <G>)
Scroll over to the Editor header, and press ENTER. There is only one part
of this that we need to setup, and that's the Miscellaneous section. Hi-
Light Miscellaneous, and press enter.
16 entrys
Netmail Restricted No
Netmail Read Only No
Netmail Export OK Yes
Netmail Use Tables No
Netmail Crash Yes
Netmail Direct Yes
Netmail Hold No
Netmail Private Yes
Netmail Kill/Sent Yes
Use Zone Gates Ask
Del.Orig.(Conf) Ask
Del.Orig.(Locl) Ask
Del.Orig.(Net.M.) Ask
Show Hard CRs Yes
Margin 60
Honor CFM No
Press ESC, Right Arrow key, and now were in FD`s Terminal setup. I`ll
take a little more of your time on this, and the next area also. In the
Terminal header, scroll down to Miscellaneous, and press enter.
16 items here, but you only need to setup a few of them.
Init (Whatever init you use for Telix, Qmodem,Commo,etc.)
Download (Whatever D/L area you want to put the files you download
into.)
Upload (You can leave this blank, as FD will prompt you for a
directory and filename you wish to send.)
Editor (Blank)
Protocol Zmodem
Emulation ANSI
Avatar Yes
Buffer 128
Connect Noise Yes
Transfer Noise Yes
Use Tables No
Auto Zmodem Yes
Local Echo No
Wrap Around Yes
Delay 10
Logging No
-----------------------------------------------------------------------------
The Inits are VERY important. FD will NOT WORK without the proper inits in
place. Check your Modems manual to see what the correct Inits should be.
I have worked with my inits to a point where I just use AT&Y0| for an Init
for BOTH the Term Program AND the Modem setup that's comming up in a few...
I also use the same init for TriBBS`s init
-----------------------------------------------------------------------------
Press ESC, down arrow, Enter on EMSI Profile. It's setup is very straight
forward. Just set it up the way you want.
What it does is, if you call a compatible system, it will automatically log
you onto a BBS with a minimum of hassle. It's like a script that logs you
onto a BBS.
12 entrys
Active Yes (or No to disable)
Name (Your Name)
Handle (Your Alias)
Password (Your Password)
Hot Keys Yes
Quiet Yes
Pausing No
Editor No
News No
New Mail Yes
New Files Yes
Screen Clr Yes
This is all we need to setup in the Terminal part.
Press ESC, Right Arrow, to Modem, and press Enter on Hardware
Modem Port (This is your Com Port that's hooked to
Your Modem. Usually 1 for com1 or 2 for
com2)
Maximum Baud Rate (2400 if you have a 2400 baud modem. If
you have a high speed modem, set this to
38,400 or 57,600.)
Lock Port (No for 2400 baud modems. Yes for all of
you speeders 9600+)
Reset Modem To Connect Speed No
Lower DTR When Busy No
Lower DTR To Terminate Call Yes
Toggle DTR Before Dialing No
Carrier Detect Mask 128
Inbound Buffer Size 0
Outbound Buffer Size 0
Press ESC, Down arrow, to Command Strings press Enter (I know we skipped the
Messages part, but the defaults in that area should work)
-----------------------------------------------------------------------------
This is the Heart of Front Door. It tells FD just how to react when a call
comes in. With the way that we're gonna set it up, FD will take the Modem
Off Hook whenever you do an event, so someone calling in will just get a BUSY
signal. This comes in handy for some things (Like tossing mail, running
Events etc.) It will also take the Modem off hook whenever you exit from FD
-----------------------------------------------------------------------------
13 entrys
Escape Code ~+++~
Return Online ~ATO| (use the letter O and not the number 0)
Onhook ATH0|
Offhook ~ATH1|
Dial ATDT
Prefix (Blank)
Suffix |
Delay 5
Init 1 (Same Init you use for TriBBS)
Init 2 (Blank)
Init 3 (Blank)
Down ATH1|
Reset AT|
-----------------------------------------------------------------------------
Please notice that we're using the | "Piping" character, and not the ^M
that most of you use.
-----------------------------------------------------------------------------
Press ESC, Down arrow to Answer Control, Enter
6 entrys here
Manual Answer Yes (A No here will cause FD NOT to answer a call)
Force Answer ATA|
Answer Delay 5
Limited Hours No (If you run your BBS 24 Hours a day)
Starting Time 00:00
Ending Time 00:00
We're getting it done now (Grin). Here is where it gets to the point where
ya gotta follow kinda close. Please bear with me on this,`cuz the end is
almost in sight...
We'll skip the printer setup, `cuz I dunno about you, but I don't wanna
print out EVERY message as I receive it. I carry over 600 echoes, and this
might tend to be kinda rough on my ole Okey 180.
Go to the Manager header, and you'll see 5 areas under it. They are;
Events
Folders
Security
Requests
Modem
We will only worry about the first 3. Hi-light Events, and press ENTER.
You MAY have to press your spacebar at this point to create a file that
FD uses. Watch the bottom of your screen, FD will tell ya if ya gotta press
your spacebar.
What you should see on your screen looks something like this;
-----------------------------------------------------------------------------
# T Days M Start Length Lev Min Max Delay
-----------------------------------------------------------------------------
0 @ -------A * 00:00 00:01 0 0 -1 0
-----------------------------------------------------------------------------
This is a Internal Event that Front Door uses to do Front Door stuff. DO NOT
Delete this event! EVER! Any other Event you wanna make/delete you can, but
this one's GOTTA be there.
Let's make a new Event, to show you how to do it. You will be making quite
a few events to allow FD to handle your BBS events etc.
Press your INS key.
A screen should come up that looks something like this;
Tag
Days -------A
Modifier Add Eventbase (+)
Start Time 00:00
Length 00:01
Errorlevel
Min.Cost 0
Max.Cost -1
Behavior
Retry Delay
Tag should be Hi-lighted, so press ENTER
Tag A (The A makes a internal event)
Days -------A (Every Day `o the week)
Modifier (Use Default)
Start Time (Use Default 00:00)
Length (Use Default 00:01)
Errorlevel 31
Min.Cost (Use Default)
Max.Cost (Use Default)
Behavior (Here`s where it gets complicated, see note below) *
Retry Delay 0
-----------------------------------------------------------------------------
* Press Enter on Behavior, and a new screen pops up. it looks something
like this, on the right hand side of your screen;
Allow Users During event Yes
Exit when Mail Is Received No
High Priority (Crash) Mail Only No
Allow File Requests Yes
Pickup File Requests No
Hold (Don't Send) File Requests No
Attempt To Pick Up Waiting Mail Yes
Allow Nodes To Pick Up Waiting Mail Yes
Prioritize Outbound Calls No
Receive-Only No
End Event When No More Mail To Send No
Send To CM Systems Only No
Send To Systems Once Only No
Inactive No
-----------------------------------------------------------------------------
Change the Default settings to what is shown here above^^. When yer done,
press ESC. You should be back into your edit Events screen now. You should
have 2 events on your screen now, and it should look something like this;
-----------------------------------------------------------------------------
# T Days M Start Length Lev Min Max Delay
-----------------------------------------------------------------------------
0 @ -------A * 00:00 00:01 0 0 -1 0
1 A -------A + 00:00 00:01 31 0 -1 0
-----------------------------------------------------------------------------
We will cover how to make eXternal (or X Events a little later). The X events
are the ones we use to do all the BBS maintenance.
End of Event Setup.
We'll set up a folder now. The reason that we're only gonna set up 1, is
because before we set it up, we need to make a sub-directory in your
C:\FD\MSGBASE directory for it. Later on, when you set up GEcho, it will
make all of the sub-directories for you, as you add your echoes into GEcho.
(Sure saves a LOT of typing that way) <Grin>.
Make the directory C:\FD\MSGBASE\TTNNEWS ( or whatever you wanna call it)
If your still in the MANAGER section, scroll down to Folders, and Press
Enter. (You MAY have to press your spacebar to create FOLDERS.FD, a file
that FD uses to keep track of your echo areas).
We'll make a folder for the Best Newsletter in ANY Net. The TTN NewsLetter.
(I just had to do that, `cuz Steve is letting us use his echo to do this
stuff. Besides, it don't hurt to suck up every once and awhile). And we may
wanna be able to post in this echo again.
Press your INS key. You should see something like this;
-----------------------------------------------------------------------------
Status
Origin
Title
Path
Users
Password
Use AKA
-----------------------------------------------------------------------------
Press ENTER on Status, and a new screen pops up on the right hand side.
10 Items, all important, some tagged, but we, being brave are gonna change
some of them.
Restricted
Echo Info *
Export OK *
Echomail *
Msgbase
Netmail
Local
Translate *
Private
Read-Only
-----------------------------------------------------------------------------
Scroll to each item, and press your spacebar (If memory serves) to change
the status on each one to what you see above. Echo Info, Export OK,
Echomail, and Translate should have a mark beside them. The rest should NOT
be marked.
Back at the Setup menu, you will see (again)
Status
Origin (Your BBS name goes here)
Title TTN News Letter
Path C:\FD\MSGBASE\TTNNEWS (or whatever dir you make for it) *
Users (Default)
Password No
Use AKA Your Address goes here
-----------------------------------------------------------------------------
* It does NOT matter what you call this directory, but it MUST be in your
\FD\MSGBASE directory. USE A Separate DIRECTORY FOR EACH ECHO THAT YOU ADD
TO YOUR FOLDERS. (Sorry `bout shouting, but that was important, besides, it
relieved some stress, I just hadta do it).
Press ESC, and you should see something like;
-----------------------------------------------------------------------------
# Status Users Password Title
-----------------------------------------------------------------------------
1 EXI-X No TTN News Letter
-----------------------------------------------------------------------------
Easy, HUH! Try adding 600 of `em. I gotta tell ya. I have my \FD\MSGBASE
setup by numbers. in other words, if this were my first entry, the sub-
directory would be \FD\MSGBASE\_1 (Notice the under-score) and before ya ask,
That's the way I like it Awh-Huh! <G>. The next one would be \FD\MSGBASE\_2
Etc...
Ok... home stretch guys... The last thing in the setup I wanna touch upon, is
the Security section. This section is for your Hubs/Nodes that call you on
a regular basis.
It is almost too simple to setup. All ya need is an address, and a password
for each entry, and use the defaults for the transfer stuff.
Let's say ya wanna put me in there , for some un-Godly reason. You would
enter my address under the SYSTEM part. And then Enter in a password for me
that we BOTH agreeded on. The rest is set to defaults.
This is the end of your BASIC Front Door Setup. There is STILL some stuff to
do before FD will run, (Like your FDRUN.BAT file, FDNODE.CTL file, and your
Nodelist stuff).
The only things left that we hafta do is to make the FDRUN.BAT file, add the
nodelist and compile it, edit your board.bat file, edit your FDNODE.CTL file,
and load your fossil driver.
Your FDNODE.CTL file is gonna be a little time consuming. It tells FD how
to dial the phone. You wouldn't want FD to dial the area-code for a LOCAL
call, so YOU have to tell it not to. Now for the hard part. Get a phone book,
and write down ALL the prefixes that are local to you.
Now for the fun. Because I live in the 407 area-code, i`ll use it as an
example. Here`s what your FDNODE.CTL file should look like, and it goes in
your \FD\NODELIST directory.
-----------------------------------------------------------------------------
DIAL
1-407-222 222 (What this does, is it tells FD that it shouldn't dial)
1-407-223 223 (the 1-407- for the numbers on the right)
1-407-228 228
1-407-236 236
(and so on for ALL L O C A L calls)
after you add all the local prefixes, the next line will be;
1-407- 1-407- (This tells FD that there are numbers in your area-code
that are not local to you)
End
COST (This tells FD how much to log for billing)
1-407-222- 0 (Free local call) And yes, ya gotta add all the local
1-407-223- 0 numbers here also)
1-407-228- 0
1-407-236- 0
(After you add everything, the next line will be)
END
-----------------------------------------------------------------------------
Another file you'll have to write is a MUCH smaller one. It's a one liner,
called EXEBBS.BAT . It resides in your MAIN Front Door directory, and looks
like this.
BOARD /F%1%4 /C%2 /T%3 /H
Refer to the TriBBS doc`s to tell ya what each one of `em do, but I believe
that the /F%1%4 says go to the BBS, then come back to FD when the callers
done. The /C%2 says use com2, The /T%3 limits the callers time ,due to a
pending FD event, and the /H means Hang up the modem.
-----------------------------------------------------------------------------
You will also have to edit your BOARD.BAT file, but after ya done soooo good
on yer FDNODE.CTL file, it`s an easy one also. Ya only gotta add something
to one line of the file;
EXAMPLE;
CD\ C:\TRIBBS
if exist door.bat del door.bat
if exist event.bat del event.bat
if exist endbbs del endbbs
BBS %1 %2 %3 %4 (This is the line)
if exist door.bat door
if exist event.bat event
if exist endbbs goto end
board
:end
-----------------------------------------------------------------------------
Notice that all we changed was the line with BBS on it. All we did was just
add the %`s from 1 to 4.
Ok guys, here`s the final chapter. It's the FDRUN.BAT file. It resides in
your MAIN Front Door directory, and it looks like this.
-----------------------------------------------------------------------------
@echo off
:Loop
C:
CD \FD
FD
REM
if errorlevel 200 goto callbbs
if errorlevel 68 goto dotridog
if errorlevel 39 goto mail_packup
if errorlevel 31 goto mail_recieved
if errorlevel 10 goto usrbrk
if errorlevel 1 goto fderror
:callbbs
call dobbs
cd\fd
goto loop
:dotridog
call tridog.bat
cd\fd
goto loop
:mail_packup
cd\gecho
gecho scan
cd\fd
goto loop
:mail_packup
cd\gecho
gecho toss
cd\fd
goto loop
:userbrk
cls
@echo User Break
goto Done
:fderror
@echo Mailer Returned An Error ( 1-9 )
cd\fd
goto loop
:done
:fatal
cls
@echo Front Door Down
:end
@echo Bye-Bye
-----------------------------------------------------------------------------
As you can see, I left ya a LOT of room for expansion. You can use ANY un-used
errorlevel from 31 up, for things like BBS maintenance, (as long as you have
a batch file to call).
Let's say ya got a BBS event that does your door maintenance, and it uses a
batch file called dorstuff.bat . Just add it to your FDRUN.BAT file with an
errorlevel. As you can see, we already have a errorlevel of 39 (mail_packup),
and 31 (mail_recieved), so if we wanted, we could create an errorlevel of 35,
and use it for the door maintenence event. This event HAS to be listed
between errorlevel 39 and 31 like this;
if errorlevel 39 goto mail_packup
if errorlevel 35 goto dorstuff
if errorlevel 31 goto mail_recieved
You have just created a new errorlevel for Front Door to use. Now, at the
bottom of the FDRUN.BAT file, you need to tell FD just what you want it to
do about this errorlevel. Here`s how it should look;
:dorstuff
cd\tribbs
call dorstuff.bat
cd\fd
goto loop
You can add this anywhere below the errorlevels part of the file. Next, go
into your FDSETUP, under EVENTS, and add errorlevel 35 as an external event
( X ) event.Tell FD what time to run the event, and if it should allow users
during the event. As soon as you do that, yer done. Front Door will handle
that event from now on.
I use a batch file called BBSM.BAT for all my BBS maintenance. All BBSM is,
is a batch file that calls several other batch files, and run this event at
midnight.
Have FUN with Front Door. If you have any problems, leave me a message here,
and i`ll get back to you asap on it. If you need the TTN Nodelist, call my
BBS at (407) 292-3963 and download it. I would send it out as a message, but
it has some long lines in it, and may not have come out just right in a
message. The name of the nodelist is Tri_Zone.Lst and it's a small file.
Rename Tri_Zone.Lst to nodelist.200, and place it in your \fd\nodelist
directory. Then go to your MAIN Front Door directory, and type in this
command
FDNC /F
This should compile the nodelist and yer now ready to rock-and-roll with
Front Door....
Remember, that no matter where you are in FD, (once you get it running), if
you need help, press ALT-H , and FD will help ya outta any jam ya get yerself
into.